logo_arduino

Arduino Modules

Velleman have now designed some shields modules for your Arduino™ allowing to interface and control applications from your micro-controller board. Pre-assembly modules built & tested ready to work with your Arduino™ UNO.
!
Velleman
5410329661182
1-5 Days
VMA0

Velleman Arduino™ Nibble Assembled Module

   Module: Pre-assembled

The assembled version of Velleman KA0 this fully Arduino® compatible microcontroller is enhanced with 4 built-in buttons and 4 blue LEDs. On top of that, the Nibble is preprogrammed with a working memory game.
Whadda
5410329729554
1-5 Days
VMA103
Weight: kg

Velleman Arduino™ ATmega32u4 LEONARDO Board

 tick  Module: Pre-assembled
The VMA103 (Arduino® Compatible leonardo) is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
Whadda
5410329725198
5-7 Days
WPB107
Weight: kg

Whadda NodeMcu V2 Lua based ESP8266 Development Board WPN107

Replacement for Velleman VMA107
The Whadda WPB107 / Velleman VMA107. The NodeMcu is an open-source firmware and development kit that helps you to prototype your IOT product within a few Lua script lines.
Whadda
5410329729585
1-5 Days
VMA201
Weight: kg

Velleman Arduino™ Protoshield & Breadboard for UNO

VMA201
The ProtoShield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with the small solderless breadboard to quickly test circuit ideas without having to solder. It has extra connections for all of the Arduino® I/O pins, and provides space to mount through-hole and surface mount.
Whadda
5410329730253
1-5 Days
VMA202
Weight: kg

Velleman Arduino™ Data logging shield

 tick  Module: Pre-assembled
new 

 New - Now Available 

A dedicated and well-designed data logging shield for Arduino. SD card interface works with FAT16 or FAT32 formatted cards. The 3.3 V level shifter circuitry prevents damage to your SD card. Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years. Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported.
Velleman
5410329673819
5-7 Days
VMA205
Weight: kg

WiFi ESP-WROOM-02 SHIELD

This convenient ESP8266 shield for Arduino includes a pre-soldered ESP8266 module, and power supply - so all the hard work is done and you will receive a plug-and-play ESP8266 solution for your Arduino. You can start straight away with the ESP8266 in serial AT command serial mode, or if you're interested in deeper exploration of the ESP8266 you can upload different firmware such as NodeMCU and others. All the GPIO pins are brought out to inline header pins, and the shield has a great online user manual so you'll be up and running in no time at all.
Whadda
5410329730284
5-7 Days
WPSH 207
Weight: kg

Whadda L293D Motor Drive Expansion Sshiled for Arduino®

This motor shield contains two motor drivers and a 74HC595 shift register and extends the pins on the Arduino from 3 to 8, which allows controlling the direction for the motor drivers.
Whadda
5410329730024
5-7 Days
VMA208
Weight: kg

3-Axis Digital Acceleration Sensor Module - MMA8452

The MMA8452Q accelerometer module is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. It is packed with embedded functions with flexible user programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall power savings relieving the host processor from continuously polling data. It has user selectable full scales of +-2g/+-4g/+-8g with high pass filtered data, as well as non filtered data available real-time.
Whadda
5-7 Days
WPSH209
Weight: kg

Whadda Multi-function Shield Expansion Board for Arduino®

Replacement for Velleman VMA209
A multi functional I/O shield for Arduino and compatible boards. Featuring LEDs, 4 Digit seven segment LED Dispays, Piezo Sounder, Switches and more.
Whadda
5410329725204
1-5 Days
VMA300
Weight: kg

Velleman 3 x 4 Matrix Soft Touch Keypad

 tick  Module: Pre-assembled
A keypad is a simple method of entering user input into your project.