The Velleman Arduino Shield kit for the UNO. General purpose INPUT - OUTPUT shield for Arduino™. 6 relay outputs, 6 analog inputs, 6 digital inputs. Downloadable sample sketch. Stackable design: the shield can be stacked with other shields. Requires 1 Arduino™ UNO (not included).

1-channel 400W dimmer. Create an atmosphere which suits you best or let your lights dim slowly to avoid unexpected surprises. It is also possible to simulate a sunrise which makes waking up a lot more pleasant! Additional software to up grade and improve this product is available from the Velleman support section on there website.

The Whadda WSSA116 Animated Xmas gadget with 126 multicoloured LED's. No need to remove battery when using external supply. 12V operation possible for use in cars, lorries, trucks. With on/off switch.

Create your own moving message. Graphic display with 35 LED's. Max. 16 characters. Adjustable scrolling speed. Press "SET" to change a particular character. Press the up or down-key to select a character and end with the "<"-sign. Display standby function: press "Standby" (press RUN to restart).

Compatible with:K6712, K8046, K8050, MK161, MK163 and VM122

Practical two-part network tester for wiring installations. Tests correct pin configurations of 10-Base-T (Cat 5), 10-Base-2 cable (coax), RJ45/RJ11 modular cables, 356A, TIA-568A/B and token ring cable systems. Remote cable tester unit can test cables installed up to 1000ft away either on wall plate or patch panel Easy-to-read display verifies cable continuity, open, short and cross-connect Comes complete with remote tester unit, RJ45 cable, RJ45 plug to RJ12 jack adaptor, 2 x BNC adaptor cables, BNC male - BNC male adaptor.

This LAN tester for various cable types is indispensable in network installation and maintenance activities. This compact device can be used for testing network or telephone cables (RJ45 (8P8C), RJ12 (6P6C), RJ11 (6P2C), RJ10 (4P4C)) and for most types of computer cables.

High quality replacement oscilloscope probe set with insulated BNC connector. A passive, high impedance oscilloscope probe designed and calibrated for use on instruments having an input impedance of 1Mohm shunted by 25pF. However, it may be compensated for use with instruments having an input capacitance of 10 - 35pF. The probe incorporates a two position slide switch in the head which selects attenuation of X1, X10 position.

PVC Test lead with protection caps, featuring 90° 4mm shrouded plugs for use with most multimeters. CAT II 1000V 15A