The PIR41 is an energy saving switch. The wide detection field is made up of up and down, left and right service field. It works by receiving human motion infrared rays. When someone enters the detection field it can operate the load at once. Suitable for use as automatic room occupancy detection - switching On and Off lighting for economical energy consumption. With automatic day/night function, adjustable light control time (10s - 7min) and sensitivity it can be used with various types of lamps and lanterns. For indoor use only and designed for installation into existing equipment. Low profile ceiling mounted design.

A Mains powered PIR sensor with adjustable 'on' time and light level sensitivity. The PIR415 PIR sensor is suitable for fitting inside walls, doors or ceilings, it only requires a 12mmØ hole. The sensor has adjustment for high and low light level and movement sensitivity. The PIR output can be adjust to stay 'on' between 5, 30 or 60 seconds or between 3, 5 or 8 minutes. These adjustments are made using the DIL switch fitted in the main module.

A Mains powered PIR sensor with adjustable 'on' time and light level sensitivity. The EMS106 PIR sensor is suitable for fitting inside walls, doors or ceilings, it only requires a 12mmØ hole. The sensor has adjustment for high and low light level and movement sensitivity. The PIR output can be adjust to stay 'on' between 5, 30 or 60 seconds or between 3, 5 or 8 minutes. These adjustments are made using the DIL switch fitted in the main module.
* An alternative branded (identical in function) product may be supplied.

A 12V powered PIR sensor with adjustable 'on' time and light level sensitivity. The PIR416 PIR sensor is suitable for fitting inside walls, doors or ceilings, it only requires a 12mmØ hole. The sensor has adjustment for high and low light level and movement sensitivity. The PIR output can be adjust to stay 'on' between 5, 30 or 60 seconds or between 3, 5 or 8 minutes. These adjustments are made using the DIL switch fitted in the main module.

A 12V powered PIR sensor with adjustable 'on' time and light level sensitivity. The EMS114 PIR sensor is suitable for fitting inside walls, doors or ceilings, it only requires a 12mmØ hole. The sensor has adjustment for high and low light level and movement sensitivity. The PIR output can be adjust to stay 'on' between 5, 30 or 60 seconds or between 3, 5 or 8 minutes. These adjustments are made using the DIL switch fitted in the main module.
This unit is a replacement for the older PIR416.

The EMS102W is a very sensitive and energy-saving motion detector. The detector’s position can be adjusted vertically and is triggered when movement is detected. The EMS102W can distinguish between night and day, you can adjust the vertical position of the device to suit your needs. Note that the detector is much more sensitive to objects moving across the detection area than it is to objects coming straight at it.

The PIR1200R is a very sensitive and energy-saving motion detector. The detector’s position can be adjusted vertically and is triggered when movement is detected. The PIR1200R can distinguish between night and day, you can adjust the vertical position of the device to suit your needs. Note that the detector is much more sensitive to objects moving across the detection area than it is to objects coming straight at it.

The PIR1200B is a very sensitive and energy-saving motion detector. The detector’s position can be adjusted vertically, horizontally and is triggered when movement is detected. The PIR1200B can distinguish between night and day, you can adjust the vertical position of the device to suit your needs. Note that the detector is much more sensitive to objects moving across the detection area than it is to objects coming straight at it. Also available in White.

The PIR1200R is a very sensitive and energy-saving motion detector. The detector is simple to install on any ceiling and offers a wide detection range. The PIR1200C can distinguish between night / dayand features an LED indicator to show on/off detection.

The PIR500 is an infrared sensor, installation of the device is very easy and suited to a wide range of applications. It has three modes of operating On, Off and Movement (PIR). The device can operate in both day and night situations, thanks to the adjustability of the PIR sensitivity and the light sensitivity. The duration of the output signal can also be adjusted.