Remote Control

!
Velleman
5410329065010
1-5 Days
K6501
Weight: kg

Remote Control by Telephone Kit K6501

  Constructional Kit: Average
This kit makes it possible to turn up to three devices on or off over the telephone. It is also possible to check the condition of a switch (open or closed). Example : when you are away on holiday, you may switch the lights on and off from time to time, check the alarm or turn on the heating before returning home. A major advantage of this circuit lies in the fact that audio signals are used to tell whether a specific output has been turned on or off. Operation is protected by a user defined code, which is simply keyed in from the telephone keypad.
Dimensions: 105 x 130mm (PCB)
Power Supply: 12Vac / 300mA
Velleman
5410329067076
1-5 Days
K6707
Weight: kg

1-Channel RF Code Lock Reciever Kit K6707

This one channel RF code lock receiver was designed to work with the old K6706B or K6706G transmitters. The ideal remote control of all kinds of applications where a device can be controlled from a distance. Some applications : garage doors, car alarms and / or central door locking systems, as well as for wireless operation of in-door or out-door lighting, etc. A choice can be made from over 8000 codes. It is also possible to use several receivers with one transmitter or vice versa.
Velleman
5410329067274
1-5 Days
K6727
Weight: kg

2-Channel RF Code Lock Reciever Kit K6727

This two channel RF code lock receiver forms the ideal remote control of all kinds of applications, where 2 different devices can be controlled on a distance. A choice can be made from over 8000 codes. It is also possible to use several receivers with one transmitter or vice-versa. Originally designed to work with the old K6706B or K6706G transmitters however will also work with K8059 / VM130T with limited compatibility.
Dimensions:
Power Supply: 2 x 9Vac or 12-16Vdc / 120mA
Whadda
5410329733629
1-5 Days
K8023
Weight: kg

10-Channel, 2-Wire Remote Control Kit K8023

  Constructional Kit: Average
This kit allows you to control up to 10 devices using only 2 wires at a long distance. Microprocessor controlled. Inputs can be push-buttons, switches or open collector outputs from another device. The receiver section provides 10 open collector outputs that allow you to control relays directly. Terminal block connectors for all input and output connections are included. All outputs are provided with LED indication. Can be used with kits K8000, K8006 and can be connected to our standard relay card : K6714 or K6714-16.
Dimensions: 70 x 50 x 16mm (Controller)
103 x 50 x 24mm (Receiver)
Power Supply: 12-15Vac or dc / 300mA
Velleman
5410329239190
1-5 Days
K8049
Weight: kg

15-Channel IR Transmitter Kit K8049

  Constructional Kit: Average

A Infra red transmitter compatible with: K6711,  K6713, K8046, K8050, MK161, MK163. 4 addresses allow the use of multiple receivers in one room.

Dimensions:
Power Supply: 3 x 1.5V Batteries (AAA)
Velleman
5410329241827
1-5 Days
K8051
Weight: kg

15-Channel IR Remote Stick Kit K8051

  Constructional Kit: Average
The K8051 15-channel IR Remote Stick features a sleek designer enclosure with just 2 buttons, yet it provides access to a stunning 45 channels (3 addresses with 15 channels each). The built-in 'all clear'-function allows the user to turn-off all channels of the current address at the same time. Channel and address selection is straightforward and easy. Even in total darkness you can select the correct channel and operate the remote.
Dimensions: 160 x 27 x 23mm
Power Supply: 2 x 1.5V Batteries (AAA)
Velleman
5410329315214
1-5 Days
K8058
Weight: kg

8-Channel RF Remote Control Kit K8058

  Constructional Kit: Average

An RF remote transmitter with 8 addresses allow the use of multiple receivers. Features: 'all clear'- function, toggle or momentary mode for each key, open-field range up to 50m, rubber keypad. Enclosure included.

Dimensions: 150 x 58 x 20mm
Power Supply: 3 x 1.5V Batteries (AAA)
Velleman
5410329383886
1-5 Days
K8087
Weight: kg

Telephone Ring with Buzzer and LED Kit K8087

  Constructional Kit: Normal

Accepts standard telephone plug, simply connect in parallel with phone line, no power supply necessary! Buzzer sounds and powerful led flashes when phone rings. Great for noisy environments, for the hearing impaired, as additional ringer, to replace existing ringer. Includes: attractive enclosure, adhesive strips for easy fixing.

Dimensions: 80 x 55 x 35mm
Power Supply: via phone line.