Microcontroller technology with 13 different functions: impulse switch, staircase light control, slow ON/OFF dimmer, interval timer, speed adjustment for fans, etc… Suitable for both resistive and inductive loads (light bulbs, high-voltage halogen lighting and low-voltage halogen lighting with ferromagnetic transformer) "Soft Start" prolongs the life of the bulbs, an advanced security system with fault indication automatically deactivates the module if the load or no-load behaves too inductively. Can be operated from several locations, simply by the parallel connection of push buttons. 2 delay times (anywhere between 5 sec. to 2 hours each) can be programmed through the learning mode. Memory is protected against power failures, equipped with fuse and key for function selection. Mains suppressor according to EN55015 norms.

A powerful high-quality dimmer, suitable for incandescent lamps, mains voltage halogen lighting and low voltage halogen lighting in combination with a conventional (wire wound) transformer. Easy push-button operation for dimming of light sources. Phase control can be disabled, non-volatile memory for last set light intensity, lots of safety features to make lamps last as long as possible, such as "oftstart" and automatic turn-off after 12h or after 20min at too low intensity. Transformer protection in case of defective light sources, LED status indication.

Simple brightness adjustment by means of a DC voltage, optically isolated adjustment input. Pre-set adjustment for full brightness, suitable for incandescent lamps, mains voltage halogen lighting and low voltage halogen lighting in combination with a conventional transformer. "Soft start" feature to ensure lamp longevity, transformer protection in case of defective light sources. LED status indication. Compatible with our computer interface cards: K8000, K8055.